- Cherry pick of aosp/1228482
As of aosp/1224611, there is a new step in the preparation of APEXes
where init calls back into apexd after DE user data is unencrypted to
allow DE apex data to be snapshotted or restored.
aosp/1228581 introduces a new apexd.status value of "activated" that
is set once APEXes are activated but before this snapshot has occurred.
init may execute "perform_apex_config" once this has occurred, so this
CL changes init to wait for "activated" rather than "ready" before
doing this.
Bug: 148672144
Test: build & flash, check boot completes and check in logs that init
waits on the correct status value.
Merged-In: I339580bf593d3b09a5dff749ac2a5d1952bcb210
Change-Id: I71b62c9dd2f7951811606002f38612784d3d9086
This will allow Phonesky to read APEXes under /data/apex/active.
Test: adb shell su 10114 dd if=/data/apex/active/com.android.tzdata@300000000.apex of=/dev/null
Bug: 154635217
Change-Id: I5278897413ca0e32aed9d1c7f82e48138bc51404
This patch removed the old writeout policy tune which was never touched since
2009. In the meantime, most of Android devices are equipped with over 4GB DRAM
and very fast flash storages like UFS, which becomes more like desktop or
servers in 2009. So, it'd be worth to go back to use the default kernel configs.
Bug: 129751503
Change-Id: Idb58f5b01bbc4afd270cffba5b8912ea3565819f
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Also reordered the directories in alphabetical order
Test: m -j
Bug: 149838525
Merged-In: I1a918d189d8bcb394ec6f818d033dbf7e4518713
Change-Id: I4b10a01ed6b3285aec6d87765f225c41ec55be96
create new profiles to allowing thawing and freezing back the freezer
cgroup
Bug: 151225245
Test: Manually verified that using the SetTaskProfiles method on the
profiles thaws and freezes back the freezer cgroup.
Change-Id: I7f3e193ebe79b49c1f6ac52b6138ff4ec26fc570
There is a longstanding bug where file-based encryption causes spurious
SELinux denials of module_request because it uses the kernel's crypto
API, and the crypto API tries to autoload kernel modules.
While this sometimes indicate missing kconfig options, it can still
happen even if all needed kconfig options are enabled. This is because
a crypto algorithm can be a composition like "hmac(sha512)", and the
crypto API will first look for the full composition before it
instantiates it using the components like "hmac" and "sha512". But
often an implementation of the full composition doesn't exist.
However, as far as I can tell, Android doesn't actually use kernel
module autoloading at all. First, Android never changes
/proc/sys/kernel/modprobe from the default of "/sbin/modprobe", yet this
isn't where modprobe is located on Android. Android's SELinux policy
contains a neverallow rule that ensures that only init (not even
vendor_init) can write to this setting, so vendors can't be changing it.
Vendors could potentially be setting CONFIG_STATIC_USERMODEHELPER_PATH,
which overrides the path of all usermode helpers including modprobe.
But this is a relatively new kconfig option, available only in
android-4.14 and later. Also, for a vendor to actually do this they'd
also need to extend the SELinux policy with a domain_auto_trans rule to
allow their usermode helper to be executed by the kernel.
Android does increasingly use kernel modules, and GKI (Generic Kernel
Image) will require them. However, the modules are actually inserted by
userspace by 'init', not autoloaded.
It's possible to disable kernel module autoloading completely by setting
/proc/sys/kernel/modprobe to an empty string. So, let's do that.
This prevents lots of spurious SELinux denials, and allows removing
unnecessary rules to allow or dontaudit the module_request permission.
Note: when the kernel doesn't have CONFIG_ANDROID_BINDERFS enabled, this
change exposes a kernel bug that causes a WARNING in get_fs_type(). To
avoid this WARNING, a kernel fix should be applied too -- currently
under discussion upstream
(https://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org).
Bug: 130424539
Bug: 132409186
Bug: 144399145
Bug: 146477240
Bug: 148005188
Bug: 149542343
Test: Tested on cuttlefish and coral:
- Checked that /proc/sys/kernel/modprobe contains /sbin/modprobe
before this change, and the empty string after.
- Checked that if all SELinux rules for module_request are removed,
there are SELinux denials for module_request before this change
but none after.
- Ran lsmod both before and after and verified that the list is the
same, i.e. checked that this change doesn't break how Android
actually loads kernel modules.
Change-Id: I4132fe1a491e7b789311afcf693c1f6493fb9dc5
Merged-In: I4132fe1a491e7b789311afcf693c1f6493fb9dc5
There is a longstanding bug where file-based encryption causes spurious
SELinux denials of module_request because it uses the kernel's crypto
API, and the crypto API tries to autoload kernel modules.
While this sometimes indicate missing kconfig options, it can still
happen even if all needed kconfig options are enabled. This is because
a crypto algorithm can be a composition like "hmac(sha512)", and the
crypto API will first look for the full composition before it
instantiates it using the components like "hmac" and "sha512". But
often an implementation of the full composition doesn't exist.
However, as far as I can tell, Android doesn't actually use kernel
module autoloading at all. First, Android never changes
/proc/sys/kernel/modprobe from the default of "/sbin/modprobe", yet this
isn't where modprobe is located on Android. Android's SELinux policy
contains a neverallow rule that ensures that only init (not even
vendor_init) can write to this setting, so vendors can't be changing it.
Vendors could potentially be setting CONFIG_STATIC_USERMODEHELPER_PATH,
which overrides the path of all usermode helpers including modprobe.
But this is a relatively new kconfig option, available only in
android-4.14 and later. Also, for a vendor to actually do this they'd
also need to extend the SELinux policy with a domain_auto_trans rule to
allow their usermode helper to be executed by the kernel.
Android does increasingly use kernel modules, and GKI (Generic Kernel
Image) will require them. However, the modules are actually inserted by
userspace by 'init', not autoloaded.
It's possible to disable kernel module autoloading completely by setting
/proc/sys/kernel/modprobe to an empty string. So, let's do that.
This prevents lots of spurious SELinux denials, and allows removing
unnecessary rules to allow or dontaudit the module_request permission.
Note: when the kernel doesn't have CONFIG_ANDROID_BINDERFS enabled, this
change exposes a kernel bug that causes a WARNING in get_fs_type(). To
avoid this WARNING, a kernel fix should be applied too -- currently
under discussion upstream
(https://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org).
Bug: 130424539
Bug: 132409186
Bug: 144399145
Bug: 146477240
Bug: 148005188
Bug: 149542343
Test: Tested on cuttlefish and coral:
- Checked that /proc/sys/kernel/modprobe contains /sbin/modprobe
before this change, and the empty string after.
- Checked that if all SELinux rules for module_request are removed,
there are SELinux denials for module_request before this change
but none after.
- Ran lsmod both before and after and verified that the list is the
same, i.e. checked that this change doesn't break how Android
actually loads kernel modules.
Change-Id: I4132fe1a491e7b789311afcf693c1f6493fb9dc5
Test: Able to boot without error
Bug: 150671726
Merged-In: If366d284f4f01ebfa660e85bad57861c120ada7e
Change-Id: I9d85c00d191dcaa46c0182b5a15cd89dcdb9ea5e
(cherry picked from commit 1a5ae50943)
Apexes do not support "on" macros, so we are moving
them into the system partition
Bug: 145923087
Test: m -j
Change-Id: Ic671a51f2ec5b91f2f631bae0f509b4aa2d057b4
Merged-In: Ic84e77269f80097b675d6a1b0d206c2bae7d918d
Apexes do not support "on" macros, so we are moving
them into the system partition
Bug: 145923087
Test: m -j
Change-Id: Ic84e77269f80097b675d6a1b0d206c2bae7d918d
Adding two new public keys for R-Developer-GSI and S-Developer-GSI,
respectively.
Bug: 149805495
Test: m r-developer-gsi.avbpubkey
Test: m s-developer-gsi.avbpubkey
Change-Id: Iaa7521ef40b94f13fe3c9c61d276678f47c60b98
Helps with support of recovery and rollback boot reason history, by
also using /metadata/bootstat/persist.sys.boot.reason to file the
reboot reason.
Test: manual
Bug: 129007837
Change-Id: Id1d21c404067414847bef14a0c43f70cafe1a3e2
When kernel lowmemorykiller driver is enabled lmkd detects it by
checking write access to /sys/module/lowmemorykiller/parameters/minfree
parameter. By default this file does not have write access and init
process changes that from "on boot" section of init.rc. However
"on boot" is never executed in the charger mode, therefore lmkd fails
to detect the kernel driver. Fix this by setting lowmemorykiller kernel
driver parameters before lmkd is started.
Bug: 148572711
Test: boot into charger mode with kernel lmk driver enabled
Change-Id: Ifc3ef725b95bdb5f7d801031429dc26bae014d1f
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
