Currently, init can create logical partitions by hardcoding them in
fs_mgr or by specifying them in device-tree. This change allows init to
also create logical partitions by using liblp, which stores partition
tables in a physical partition. The current name for this partition is
"android".
Two aspects of this code will change long-term. One, the prototype code
using device-tree will be deleted once fastboot supports logical
partitions. Two, libdm will obsolete most of the code in
fs_mgr_dm_linear.cpp. For now however we preserve how the prototype code
functions and we layer liblp on top of the existing dm_linear logic.
Bug: 79173901
Test: N/A
Change-Id: If014a109da78fa12269bf0df0dda39028ac2d1aa
It's not going to be possible to safely assume $OUT has the right init
scripts to be parsed at a given point, so instead we fall back to
parsing init scripts individually.
This isn't a full revert of the previous commits. We retain parsing
correctness of the 'import' statements and we retain using the new
host side property functionality.
Also, fix a bug where main was not actually returning -1 on failure
Bug: 36970783
Test: testing individual files still works correctly
Change-Id: I4ae5620f234caa08993deb2c30825904a75f6654
init need find required devices and it some times takes a long time due
to rogue drivers. Add a warning if the timing is longer than 50ms.
Bug: 80494921
Test: Reboot
Change-Id: I8f937d7ca7127dc89ed76bb6e5f1781459d5c94a
Init never checked the return values of the calls made during first
stage init (since of course they're not going to fail, right?). But
of course commands can fail and they might not necessarily be obvious
when they do, so let's make it obvious.
Since the kernel log isn't up until later, this creates a list of the
failures that can then be sent to the kernel log once it's ready
(pending of course failures in setting it up...)
Test: boot bullhead, don't see errors
Change-Id: I8c12c61fa12e4368346e8b0e1c0bb0844b5d0377
When adding a new error case for host_init_parser, I didn't handle the
individual line callbacks used for ueventd correctly. This change
fixes that.
Test: bullhead boots without extraneous ueventd warnings
Change-Id: I56cad854b0defd936a7fbcab73fe2f2963c0e2e4
recovery partition now supports shared librarys. Therefore, init can now
be built as a dynamic executable both for normal and recovery modes.
To save save in the recovery mode, not all libs are dynamically linked.
Libs that are only used by init in the recovery mode are still
statically linked.
Note: init is still a static executable for legacy devices where
system-as-root is not on, because the dynamic linker and shared libs
which are in /system are not available when init starts.
Bug: 63673171
Test: `adb reboot recovery; adb devices` shows the device ID
Test: device boots to the UI in normal mode.
Test: do that for both walleye (system-as-root) and bullhead (legacy
ramdisk).
Change-Id: I30c84ae6a8e507e507ad0bb71acad281316d9e90
Bug: 36970783
Test: test bullhead successfully at TOT
Test: create errors and check that they're caught
Test: create uid in passwd and check that it's successful
Change-Id: I237fb8df16a294757fe898bdbbd42e850bcb8301
Allow specifying properties on the command line when running host init
verifier. This is needed particularly for importing files that have a
property expansion in their path.
Handle the import statement on host, basing paths off of the out
directory of Android builds.
Bug: 36970783
Test: verify that bullhead imports the correct files and checks them
Change-Id: I4fe263016b3764a372708b559bc0c739b1b7e5e3
Drop all references to keychord_id and id and instead use keycodes_
as the id. The keycodes are a std::vector<int> with an unique
sorted-order emplacement method added in the parser. Solves the
academic issue with duplicate keychords and trigger all services
that match rather than first match only.
Test: init_tests
Bug: 64114943
Change-Id: I5582779d81458fda393004c551c0d3c03d9471e0
Move things around so that keychords.cpp is independent of service
and init and can be individually tested with few dependencies.
Permits also rolling out the keychords as a class in a future commit.
Improve parser checking.
Test: init_tests
Bug: 64114943
Change-Id: I82570bc6269ed478db784ec38a8bc916da2be2be
Currently, permissions for ctl. property apply to each action verb, so
if a domain has permissions for controlling service 'foo', then it can
start, stop, and restart foo.
This change implements finer grainer permissions such that permission
can be given to strictly start a given service, but not stop or
restart it. This new permission scheme is mandatory for the new
control functions, sigstop_on, sigstop_off, interface_start,
interface_stop, interface_restart.
Bug: 78511553
Test: see appropriate successes and failures based on permissions
Merged-In: I6ce915ae39954a67eb6fe1795a93cf715c352ae4
Change-Id: I6ce915ae39954a67eb6fe1795a93cf715c352ae4
(cherry picked from commit 1debdcf1cf)
It's currently not clear that the error no indicating the
failure to invoke the library function. This change introduces
logs at the failing of socket connect, that could be clearly
get the true reason.
Test: Set system property with failed, and socket recv errno
log will show
Change-Id: I36bf66988811f953e679d1c5a468de0bf1ab0a05
Signed-off-by: Jinguang Dong <dongjinguang@huawei.com>
Add the ability to enter a network namespace when launching a service.
Typical usage of this would be something similar to the below:
on fs
exec ip netns add namespace_name
service vendor_something /vendor/...
capabilities <lower than root>
user not_root
enter_namespace net /mnt/.../namespace_name
Note changes to the `ip` tool are needed to create the namespace in
the correct directory.
Bug: 73334854
Test: not yet
Change-Id: Ifa91c873d36d69db399bb9c04ff2362518a0b07d
During uevent processing, some "by-name" symlinks will be created.
/dev/block/<type>/<device>/by-name/<partition>
<type> can be: platform, pci or vbd.
<device> might be: soc.0/f9824900.sdhci, soc.0/f9824900.sdhci, etc.
<partition> might be: system, vendor, system_a, system_b, etc.
e.g., on a non-A/B device:
/dev/block/platform/soc.0/f9824900.sdhci/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
On a A/B device:
/dev/block/platform/soc/1da4000.ufshc/by-name/system_a
/dev/block/platform/soc/1da4000.ufshc/by-name/system_b
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_a
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_b
However, those symlinks are "device-specific".
This change adds the "generic" symlinks in ueventd, in addition to
the existing symlinks, when the possible "boot devices" are specified
in device tree. e.g.,
&firmware_android {
compatible = "android,firmware";
boot_devices ="soc/1da4000.ufshc,soc.0/f9824900.sdhci";
}
The following symlinks will then be created on the aforementioned non-A/B
and A/B devices, respectively.
/dev/block/by-name/system
/dev/block/by-name/vendor
/dev/block/by-name/system_a
/dev/block/by-name/system_b
/dev/block/by-name/vendor_a
/dev/block/by-name/vendor_b
Note that both <type> and <device> are skipped in the newly create symlinks.
It assumes there is no more than one devices with the same <partition>,
which is the assumption of current first stage mount flow.
Finally, when 'boot_devices' in DT is absent, it fallbacks to extract
'boot_devices' from fstab settings. e.g., using 'soc/1da4000.ufshc',
'soc.0/f9824900.sdhci' for a fstab with the following content:
/dev/block/platform/soc/1da4000.ufshc/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
Bug: 78613232
Test: adb shell ls /dev/block/by-name
Change-Id: Iec920b5a72409b6a2bdbeeb290f0a3acd2046b5d
The uevent.partition_num easily collides between partitions, for
example:
Both /dev/block/sda3 and /dev/block/sdd3 will generate the same symlink:
/dev/block/platform/soc/1da4000.ufshc/by-num/p3
This change remove those by-num symlinks as there seems no effective
user of it.
Bug: 78613232
Test: m init_tests && \
adb push $OUT/data/nativetest64/init_tests/init_tests /data/. && \
adb shell /data/init_tests
Change-Id: I8dfa8dc1a2f9fc9296aa30f33e905bf158b501de
This adds an API to fs_mgr for reading dm-linear tables out of device trees
and issuing device-mapper ioctls. The device tree code will be
implemented separately. The dm-linear structures in fs_mgr are organized
assuming we may want to pull them from sources other than DT (for
example, text files, binary blobs, or something hardcoded for testing).
File systems which are mounted from these logical partitions have
specific fstab requirements. The block device must be a partition name,
and if Verified Boot is used, that name must match the vbmeta partition name.
Second, the entry must have the "logical" fs_mgr flag. Example fstab
entry:
vendor /vendor ext4 ro wait,logical
Example fstab entry in device tree:
vendor {
compatible = "android,fstab";
dev = "vendor";
type = "ext4";
mnt_flags = "ro";
fs_mgr_flags = "wait,slotselect,avb,logical";
};
Bug: 78914864
Test: N/A
Change-Id: I4d8878ea8858f26310119616cadc3ee0dd08566c
Since event sources can come and go asynchronously because of delayed
driver instantiation due to initialization or firmware upload, USB
attched devices, kernel module loads, or test automation sources like
monkey, add in inotify on /dev/input/ to support these possibilities.
Test: manual, boot, check registered chord works
Bug: 64114943
Change-Id: Ie598bb6f5bf94b2034ab33cf3be7fa15d3467141
GetIntProperty() isn't used after
Ied46e9346b4ca7931aa4dcf1c9dbc11de0e12d93, so it can be removed.
Test: build
Change-Id: I5736f553db1a615d51b8fe3cbf9b4aee89451076
FindService can't be used w/ interfaces due
to the fact that multiple interfaces can be
added to any given interface.
Bug: 79418581
Test: boot device, manually use ctl commands
Change-Id: I7c152630462c9b7509473bc190f5b30460fcc2bc
e.x.:
interface_start android.hardware.nfc@1.0/default
onrestart interface_restart android.hardware.nfc@1.0/default
Fixes: 79418581
Test: add this to a service, and killing that service, light is restarted
onrestart interface_restart android.hardware.light@2.0::ILight/default
Change-Id: Ia7ac9380f01038752325cfbe030df1dd4a5665e2
Replace deprecated /dev/keychord driver with /dev/input/ interface.
Will restrict which nodes are active and relevant, and try to mask
out any unreferenced inputs with EVIOCSMASK if available.
Test: manual, boot, check registered chord works
Bug: 64114943
Change-Id: I2bbf84a6e472d720f02282e10d56795b75ac62d1
This commit uses vendor sepolicy file version (defined in
`/vendor/etc/selinux/plat_sepolicy_vers.txt`) to determine whether the
source context should be set as `u:r:vendor_init:s0`.
Before this commit, the criterion was `ro.vndk.version` >= 28. However,
the check in `property_service.cpp` will always be true because
`ro.vndk.version` hasn't been loaded from `/vendor/default.prop`.
Furthermore, under some circumstances, `ro.vndk.version` may be
different from `plat_sepolicy_vers.txt` (e.g. O-MR1 vendor does not
define `ro.vndk.version`).
Bug: 78605339 # high-level bug to combine O-MR1 and P GSI
Bug: 79135481 # the usage of `ro.vndk.version` in init
Test: vts-tradefed run vts -m VtsTrebleVintfTest # tetheroffload
Change-Id: Ied46e9346b4ca7931aa4dcf1c9dbc11de0e12d93
In order to support dm-linear devices, we need an additional first-stage
step to ensure that required devices are created. This must happen before
setting up dm-verity or mounting any first-stage partitions.
This patch refactors FirstStageMount so that having a compatible fstab
is optional. This will let us use InitRequiredDevices on systems that
would not otherwise perform first-stage mounts.
Bug: 78914864
Test: non-AVB devices still boot
Change-Id: I11265375a9900d983da8cabcc77d32c503ded02e
