If ro.zygote is zygote64, don't bother running 32-bit test.
Otherwise abilist{32,64} decides what tests to run.
Bug: 291874369
Test: make gsi_arm64-user; Check /system/etc/init/hw
Change-Id: Id10b2242606d6400acc29c3174f713581d6cce2e
To start an early_hal service from a bootstrap vendor apex, init now
reads .rc files from bootstrap apexes as well.
In this change, perform_apex_config command is re-purposed to support
bootstrap mode. Now we have some similarity between two apexd calls:
- for bootstrap apexes (in the bootstrap mount namespace):
exec_start apexd-bootstrap
perform_apex_config --bootstrap
- for normal apexes (in the default mount namespace):
restart apexd
...
wait_for_prop apexd.status activated
perform_apex_config
Note that some tasks in perform_apex_config are not needed in the
bootstrap. For example, we don't need to create apexdata directories
for bootstrap apexes.
Bug: 290148081
Test: VendorApexHostTestCases
Change-Id: I8f683a4dcd7cd9a2466a4b1b417d84c025c37761
This folder is used to host bootanim data files.
Bug: 210757252
Test: /data/misc/bootanim is correctly created.
Change-Id: I9c9949316d073ad7ebac503f097c5fee6c0b2a22
Since Android 14, Android does not use fsverity builtin signatures.
(fsverity remains supported, but signatures are verified in userspace,
or fsverity is used for integrity-only use cases.) Therefore, the only
reason to still run 'fsverity_init --load-verified-keys' at boot time is
to ensure that old files can still be opened, if:
- They were created by Android 13 or earlier, with an fsverity builtin
signature by a key in /{system,product}/etc/security/fsverity/.
- *And*, the kernel still has CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y.
However, it appears that this isn't actually needed anymore. Only two
features could potentially be affected: APK verity and updatable fonts.
APK verity wasn't widely rolled out before being disabled, and updatable
fonts have recovery logic in place for when the files cannot be opened.
And in any case, disabling CONFIG_FS_VERITY_BUILTIN_SIGNATURES in the
kernel is recommended and would avoid any problem.
Bug: 290064770
Test: presubmit
Change-Id: I3376c3f0b4b9bd4ba2fd614259522be0c1daafb6
lpdumpd runs as "system", not "root". Adjust the DAC permissions of
/metadata/ota so it can call SnapshotManager::Dump.
Bug: 291083311
Test: lpdump
Change-Id: I97fd7eb2055cf6d31fd42f1021e2f99edbdb838a
The "update_verifier_nonencrypted" service is being replaced with simply
"update_verifier", so update init.rc accordingly.
Bug: 208476087
Test: presubmit
Change-Id: I58f3fb25167ff7d3679c72e5e9c012f02fa5b516
The three actions for "zygote-start" are identical except for their
property triggers. This seems to have been left over from when Android
supported both File Based Encryption (FBE) and Full Disk Encryption
(FDE), causing there to be four possible encryption states:
- ro.crypto.state=unsupported (No encryption configured)
- ro.crypto.state=encrypted && ro.crypto.type=file (FBE enabled)
- ro.crypto.state=unencrypted (FDE supported but disabled)
- ro.crypto.state=encrypted && ro.crypto.type=block (FDE enabled)
It seems that the reason the zygote-start action was duplicated three
times was to exclude the "FDE enabled" case, which could only be done by
explicitly listing the other three cases.
However, now that FDE is no longer supported, only the first two cases
are possible. Therefore, zygote-start can just be the whole trigger.
Bug: 208476087
Test: presubmit
Change-Id: Icd6e4b0d2fb3f9f20595c0af4e2e35350564da8d
Remove the code that "locked" the .fs-verity keyring at a certain point
in the boot. It probably was thought that this achieved some useful
security property, which is a bit questionable. Regardless, Android no
longer uses fsverity builtin signatures. The only code that is still
being kept around is enough to access existing files on old kernels, and
for this "locking" the keyring is definitely not essential.
Bug: 290064770
Test: presubmit and booting Cuttlefish
Change-Id: Ide5729aeac5772658b2a3f0abe835988b8842b02
Based on experiments, we fount out 128 (128 x global readahead window
size = 16mb) is the optimal multiple to boost up read speeds for the
sequentially accessed files with POSIX_FADV_SEQUENTIAL.
Bug: 195311558
Test: check the /sys/fs/f2fs/<userdata partition>/seq_file_ra_mul value
Change-Id: I7563ad6e47b9ab76ae7fe36978d0e5970a7490e8
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Due to the work done for b/156305599 ("Ensure no process except vold can
create directories like /data/system_ce/0"), the SELinux policy now
enforces that vold is the only process that can write to directories
that contain per-user encrypted subdirectories. This is essential to
prevent bugs where directories that are supposed to be encrypted get
created too early so are not actually encrypted as intended.
However, this only works when SELinux is in enforcing mode. When
SELinux is in permissive mode, only DAC is enforced, and the file modes
allow other processes to write to many of these directories. That
allows system_server to break things once again.
Therefore, remove the write bit from the file modes so that write access
is always denied to processes that don't have CAP_DAC_OVERRIDE. This is
not as strong a restriction as the SELinux policy, which still applies
independently, but it does keep out system_server by itself.
Also remove the sticky bit from /data/misc_ce and /data/misc_de, since
there is no reason for it. (It probably was originally copied from
/data/misc, which might need it. But misc_{ce,de} don't need it.)
Bug: 285239971
Test: Booted Cuttlefish
Change-Id: I1213a4d18c5f851acf213d786400d79d73777ed0
It's necessary to have the right dalvik.vm.* flags in place when they
are validated by odrefresh.
Test: See the other CL in the topic.
Bug: 281850017
Ignore-AOSP-First: Will cherry-pick to AOSP later
Change-Id: Ib64790dde97faaa6b62ead2c1c8dd53c97f97f9c
Set the user explicitly.
For boringssl self-test, changed to 'nobody' since
this test doesn't require permissions.
Bug: 276813155
Test: boot, check can 'nobody' can still write to kmesg.
Change-Id: I32f7134e83183bd054bffbb22d412d7a2dc0ad09
There are multiple use cases in Android for which background writes need
to be controlled via the cgroup mechanism. The cgroup mechanism can only
control background writes if both the blkio and memcg controllers are
mounted in the v2 cgroup hierarchy. Hence this patch that migrates the
blkio controller from the v1 to the v2 cgroup hierarchy.
The blkio controller has been marked as optional since not all Android
kernels enable this controller (CONFIG_BLK_CGROUP).
This patch increases the TOTAL_BOOT_TIME for devices with a 4.19 kernel
(redfin) from 18.9 s to 20 s. This patch does not affect the boot time
for devices with a 5.10 or 5.15 kernel.
This patch increases the time spent in CgroupMap::ActivateControllers()
by 25 microseconds in Cuttlefish on an x86-64 CPU.
CgroupMap::ActivateControllers() is called by Service::Start().
Bug: 213617178
Test: Cuttlefish and various phones
Change-Id: I3c07c1be84c3feb277b7d7003652d5d3b57c6541
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Bug: 260366497
Bug: 264600011
Test: The correct label is assigned to dir after taking reboot
Test: Both system_server and dumpstate can access it
Change-Id: Icecbb59ddf936088aa3873bf1b143a08f035fefe
Grant read/write access to anyone for /data/misc/wmtrace folder on
debuggable builds, it's further protected by the selinux policy.
This is to allow systemui process to write proto logs to the same folder
on device as WindowManager, both can contribute to the transitions like
PiP, Split-Screen and etc.
Bug: 251513116
Test: adb shell dumpsys activity service SystemUIService \
WMShell protolog [start | stop]
Change-Id: Ice57efa17c61d132b02c0a11a762c24d772bd90a
A critical shutdown service is one that stays on right until the system
is rebooted. In order to be able to capture kernel messages right until
reboot this is required, otherwise after the console service is
terminated some messages can be lost.
Test: Reboot and verify messages show up on serial further down the reboot process
Change-Id: Iea58b5a76afe45b3346803021e3be81742b02ea0
There are multiple use cases in Android for which background writes need
to be controlled via the cgroup mechanism. The cgroup mechanism can only
control background writes if both the blkio and memcg controllers are
mounted in the v2 cgroup hierarchy. Hence this patch that migrates the
blkio controller from the v1 to the v2 cgroup hierarchy.
This patch increases the TOTAL_BOOT_TIME for devices with a 4.19 kernel
(redfin) from 18.9 s to 20 s. This patch does not affect the boot time
for devices with a 5.10 or 5.15 kernel.
This patch increases the time spent in CgroupMap::ActivateControllers()
by 25 microseconds in Cuttlefish on an x86-64 CPU.
CgroupMap::ActivateControllers() is called by Service::Start().
Bug: 213617178
Test: Cuttlefish and various phones
Change-Id: I490740e1c9ee4f7bb5bb7afba721a083f952c8f2
Signed-off-by: Bart Van Assche <bvanassche@google.com>
The folder is used for temporary files of virtualizationservice, with
a subfolder for each running VM. This wil continue to be the case but
each subfolder will be populated by a different instance of virtmgr,
running under the UID of the client (as opposed to system UID of
virtualizationservice).
To this end, change the permission mask of the root folder from 0770 to
0775. This gives non-system UIDs the permission to search the root
folder. This is necessary for the clients to be able to search their
own subfolder. It does not give them permission to read other
subfolders as those will be owned by different client UIDs.
Bug: 245727626
Test: atest -p packages/modules/Virtualization:avf-presubmit
Change-Id: Ie6e3be601ccb3b385f70bcf5b31bf8fff3aff8bc
Defaulting Android to limit memlock to 64KB. This will help preventing
pages from being swapped until the app is killed it's memory will stay
resident. CTS test is enforced only in U+ devies.
Bug: 201797650
Test: Added new test to verify we are memlock at or under 64KB
Change-Id: I5a9e9da12f6df5a056ee47d0593c13e9c779e054
If a service doesn't specify any capabilities in it's definition in the
.rc file, then it will inherit all the capabilities from the init.
Although whether a process can use capabilities is actually controlled
by selinux (so inheriting all the init capabilities is not actually a
security vulnerability), it's better for defense-in-depth and just
bookkeeping to explicitly specify that boringssl_self_test doesn't need
any capabilities
The list of capabilities was obtained via:
```
$ adb pull /sys/fs/selinux/policy /tmp/selinux.policy
$ sesearch --allow -s boringssl_self_test -c capability,capability2 /tmp/selinux.policy
```
Bug: 249796710
Test: device boots
Test: presubmit
Change-Id: I866222e2325e59d7e39d00db59df7b83efc657d9
Early processes can't rely on APEXes anyway. We don't need to run
linkerconfig.
This helps to reduce the storage usage (no
/system/bin/bootstrap/linkerconfig) and the boottime (not running
linkerconfig).
If we need more complicated linker config even for early processes, then
we could generate it at build-time and use it like recovery version.
Bug: 262330207
Bug: 260982509
Test: MicrodroidAppTest
Test: device boots
Change-Id: Iceca5ffdb1655fd94e90b0091f439bd22130185e
Current period of this is 3 sec and it is used when Perfetto profiling is running on Android. Without Perfetto profiling, it doesn't affect the system at all. However, 3 sec doesn't provide enough granularity to understand F2FS I/O behaviors. To make F2FS I/O profiling ftrace effective, set the ftrace period to 1 sec.
Test: check f2fs iostat_period_ms sysfs node value
Change-Id: I2d418795613dfbd1aea6c4f13c9a39af3deb1c4d
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Create a mirror directory for misc_ce and misc_de storage by bind
mounting the respective directories. This is done for the defaul null
volume only, and other volumes are handled at a later staged.
When an SDK sandbox process is spawned and data isolation needs to
occur, the sdksandbox directories present in the misc directories will
be used to bind mount from, after tmpfs is mounted on the original.
Bug: 214241165
Test: atest SdkSandboxStorageHostTest
Change-Id: Icb1dc7d7fbd53a5c3853acf2f9d4d75b278d7295
Merged-In: Icb1dc7d7fbd53a5c3853acf2f9d4d75b278d7295
