With init parsing fstab fragments from kernel separately, the fs_mgr
would completely miss the device tree entries. That leads to things like
'adb remount' to go through without warning for verity even if /system
is verified. This happens because 'verity_update_state' completely
misses the partitions passed to android through the device tree.
solution is to teach fs_mgr about device tree fstab entries and add 2
new public APIs.
1. fs_mgr_read_fstab_dt() - reads device tree and returns fstab
generated from it.
2. fs_mgr_read_fstab_default() - reads both device tree fstab and
/fstab.{ro.hardware} and returns the combined table.
This also reduces the hardcoded /fstab.{ro.hardware} occurence only to
fs_mgr and for eveyone who wants to read the "default" fstab must be
changed to call fs_mgr_read_fstab_default() instead. e.g. adb.
b/27805372
Test: Angler was used since it has 2 early mounted partitions instead of
one. 1 verified and 1 unverified.
- Boot angler successfully without early mount
- Boot angler successfully with /vendor early mount and test if 'adb
remount' warns us about verity
- Boot angler successfully with both /system and /vendor early mounted
and ensure 'adb remount' warns us about verity.
- check partitions.system.verified status after /system early mount ot
ensure it is set to VERITY_MODE_DEFAULT.
- 'adb disable-verity' with early mounted /system doesn't work due to
missing changes in adb
TODO:
change adb to use the new fs_mgr_read_fstab_default() API
Change-Id: I82038d87c7a44488e938acce2cc1082c08f6f73a
Signed-off-by: Sandeep Patil <sspatil@google.com>
The clang static analyzer is complaining that we are not checking the
setegid() return value, so let's add these checks. We should never
fail to return to AID_ROOT, so fail hard in this case.
Bug: 26962034
Test: Boot bullhead
Test: export WITH_STATIC_ANALYZER=1 and run 'mm' in the project directory
Change-Id: I62e95b045c5734305c71502871b6cf17f152edbc
* changes:
fs_mgr: add a generic fs_mgr_get_boot_config internal API
init: early_mount: create device node for verity metadata partition
init: early_mount: disallow partitions to be verified at boot
init: early_mount: add support to mount verity enabled partitions early
fs_mgr: make fs_mgr_setup_verity public API
fs_mgr: fix the fs_mgr_setup_verity param name
init: refactor to allow successive device_init calls
fs_mgr: add fs_mgr_do_mount_one() API
Most devices pass the veritymode through 'androidboot.veritymode' kernel
cmdline partition. However, for those who don't, the verity state is
read from a different block device whose path it passed to "verify="
fs_mgr option in fstab.
This change add support for such a case if the partition that needs to
be mounted early requires this additional block device to load the
verity state from.
Note that, there can only be 1 partition to get the verity state
regardless of the number of partitions we enable verity for.
Bug: 27805372
Test: Test angler by removing the metdata argument in fstab when it
boots fine. Tested by adding the argument when it fails to boot as
veritymode gets set to EIO during early mount due to lack of access to
properties as expected.
TODO: fs_mgr must pull the veritymode from kernel cmdline or device tree
by itself
Change-Id: I9e62b8c1bf2c0ae0365677df697a0cbe9e5810c1
Signed-off-by: Sandeep Patil <sspatil@google.com>
While technically possible, the verification at boot basically will
block init for as long as the entire partition is read while nothing
else is running. Disallow that as this is not going to be used anywhere.
Bug: 27805372
Test: boot angler with verifyatboot fs_mgr option for early mounted
vendor partition. That resulted in a panic() as expected.
Change-Id: I9da5caa163cae8bce6dbfb630f0ed5605ea044a0
Signed-off-by: Sandeep Patil <sspatil@google.com>
support mounting partitions early regardless of their "verified" status.
uses the newly exported fs_mgr APIs to split verity setup and mount
operations.
b/27805372
Test:
Angler:
- Early mount /vendor without dm-verity
Sailfish:
- Early mount /vendor without dm-verity
- Early mount /vendor with dm-verity
TODO:
add support for metadata partition used in angler
to load dm-verity data
Change-Id: Ie2768d4d895c19d045293c573773ee7bb03fff99
Signed-off-by: Sandeep Patil <sspatil@google.com>
device_init opens the uevent socket and sehandle when called.
For early_mount however, depending on the fs_mgr flags we may call this
in order to run coldboot for device mapper, dm-verity devices etc.
So the change makes sure we don't try to re-open the uevent socket,
file context handle and selinux status on successive calls to
device_init from within the same process.
b/27805372
Test: Boot saifish successfully
Change-Id: Ifa0e665403211684183efb9be66e4e8d0d86a206
Signed-off-by: Sandeep Patil <sspatil@google.com>
Treble allows framework-only (system.img) OTA. To libavb statically
linked in init/fs_mgr cannot parse the AVB metadata of system.img, add
this property for the Treble OTA match process.
Bug: 35236019
Test: Normal boots, use 'adb shell getprop' to check the property is set.
Test: Recovery boots, press 'Mount system' and use 'adb shell getprop'
to check the property is set
Change-Id: I552be229c4efd45088d93252ac67176606f75d4d
* changes:
init: fstab: add support to read fstab entries from device tree
init: early_mount: add support to mount non-verity partitions early
init: remove the existing early_mount code
init: refactor: add support for doing early coldboot
ueventd: make selinux labeling optional for device creation
Use this for bootstat and init. This replaces the custom uptime parser in
bootstat.
This is a reland of aosp/332854 with a fix for Darwin.
Bug: 34352037
Test: chrono_utils_test
Change-Id: Ib2567d8df0e460ab59753ac1c053dd7f9f1008a7
for early mount, we need a way to tell init where to find vendor,
odm partitions (also system in case of non-A/B devices). Also, that
needs to be independent of kernel cmdline since the cmdline will likely
exceed its limit.
The change adds support for parse and create fstab entries that can be
directly sent to the fs_mgr for mounting partitions early in init first
stage.
Sample DT entry to mount vendor partition early on angler-
firmware {
android {
compatible = "android,firmware";
fstab {
compatible = "android,fstab";
vendor {
compatible = "android,vendor";
dev = "/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor";
type = "ext4";
mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
fsmgr_flags = "wait";
};
};
};
};
b/27805372
Test: Boot angler and sailfish with early "vendor" partition mount by
adding aforementioned DT node and enable CONFIG_PROC_DEVICETREE in kernel
Change-Id: I669013e3fdb157e88719436534f63989dec95d60
Signed-off-by: Sandeep Patil <sspatil@google.com>
This is done by parsing 'androidboot.fstab=<fstab>' kernel cmdline
option to get the fstab file that *only* specifies partitions to be
mounted early (i.e. in init's first stage).
Note that, the same fstab file may not be used as an argument to
mount_all later in the boot as that will cause fs_mgr to fail with
EBUSY.
TODO:
- Possibly add a new mount_mode so the same fstab can be used for
early_mount, 'mount_all --early/--late' etc.
- Add support for dm-verity enabled partitions to mount early.
- Add support for getting fstab arguments through DT instead of kernel
cmdline.
Bug: 27805372
Test:
Boot angler by passing a seperate fstab file using the kernel
cmdline option to mount vendor partition early, remove the vendor
partition entry from the main fstab file for the test.
Boot sailfish by passing a seperate fstab entry via device tree
to mount vendor partition early. Remove vendor partition entry from
the main fstab file for the test
Change-Id: I18785b893c54c8cee960ab44d5e8f83e5d624aa8
Signed-off-by: Sandeep Patil <sspatil@google.com>
keeps parts of the code that are still needed for the fs_mgr
+ dt based implementation
b/27805372
Test: boot angler, sailfish without regressions
Change-Id: I1b08f8b7b4f2e67118d328443a5011c0f5ead919
Signed-off-by: Sandeep Patil <sspatil@google.com>
We don't want to spend time creating devices that are unncessesary
during early (init first-stage) mount. So, refactor the devices code
tha allows us to call into coldboot and has the
- ability to only create devices that are specified by the caller
- ability to stop coldboot cycle when all devices that the caller is
interested in
- ability to run coldboot for a specific syspath
- ability to run ueventd code unmodified
Test: Tested boot on angler, sailfish
Change-Id: Id8f3492380696760414eadc20d624d300c904f8e
Signed-off-by: Sandeep Patil <sspatil@google.com>
I find myself using something like this every time I add functionality
to init. I cannot possibly be the only one doing this. On the other
hand, if this hasn't been added for so long, maybe there's a reason
for that.
The advantage of using a test service versus modifying an existing
service is that the test service doesn't *require* any permissions or
privileges, so you can add and/or remove whatever you need to test
without breaking the service.
I found it useful to have the service check its own /proc/<pid>/status
from command-line arguments, so that's what the service does.
This CL also adds a .clang-format file for init.
Bug: None
Test: Service runs and exits successfully.
Change-Id: I3e7841a7283158e10c0bf55e0103c03902afb1f0
This is to setup a way for us to run coldboot during init first stage
and also at ueventd startup. We do not have all of the file context
during the first stage, so the "early" coldboot needs to proceed without
labelling the device nodes. However, the follow up in ueventd must label
these nodes. This change allows us to do both.
b/27805372
Test: Boot angler successfully and compare do before/after comparison of
the output of 'ls -AclpqRZ /dev' to ensure there are no differences.
Change-Id: I5e88bd7da8a1d2cc41e3abba30dda463ecbde32e
Signed-off-by: Sandeep Patil <sspatil@google.com>
While keeping the old /ueventd.$ro.hardware.rc configuration for devices
without early mount or vendor,odm split
b/34967636
Test: Boot angler and sailfish without regressions
Change-Id: I8d671911fd23fb1c0b5624ae209bad86137c88b7
Signed-off-by: Sandeep Patil <sspatil@google.com>
Add wait time log for exec service execution time
Fix memory leak when exec service failed to start
Test: on marlin
Bug: 34518530
Change-Id: I01736bd9b1429414f3dc91dd5d02d88a681f0985
This reverts commit db929bf9b7.
Seccomp is now inserted at the zygote level, not in init
Bug: 34710876
Test: Boots, seccomp policy in zygote & zygote64 but not init
Change-Id: I9075a79793171a4eaccf6228e9ff3398c791f8bd
Add syscalls required by sanitizers.
Bug: 34606909
Test: Make sure Android boots when built with SANITIZE_TARGET='address'
Change-Id: Ifa223fb663a4ff43c8b8df9b7bf9452e41079e2e
There are many use cases from vendors to exec service in background and then
use a shell scriprt to wait for the command done.
This CL is to add a wait_for_prop command to suppor those use cases.
Bug: 34746108
Test: on marlin
Change-Id: Ia81290b0928f9d375710d2daa546714f0cd65b72
