There is an alarm() call that provides a 30 second timeout in case
logd is unavailable. The main reason for this is in the case that logd
is crashing, debuggerd is ptrace'ing logd, and tombstoned is
attempting to dump log messages. In this case, with no other checks
and without this alarm, tombstoned will deadlock when dumping log
messages.
However, tombstoned already has two mechanisms to prevent the above
situation from happening:
1) It checks that the thread name that is is dumping is either logd or
starts with "logd." and skips dumping logs in this case.
2) It does not dump logs if it is running in process for any process.
Calling alarm() or modifying signal handlers from general purpose
libraries is not recommended either, so without a strong reason to
keep this, this change removes it.
This also shortens the liblog.wrap_mode_blocks test time, since the 30
second issue that it ensures does not happen has been fundamentally
removed.
Test: `kill -8 `pidof logd`` succeeds without delay
Test: liblog, logd unit tests
Change-Id: Id8a40544645d220e49f7ba299201af80a0c44de9
We disabled then re-enabled a set of tests believing that they were
stable; they were not, so we disable them again while we investigate
their stability.
A majority of tests filter the logs from logd based on pid, so running
in isolation helps them not see unexpected information from other test
runs.
Bug: 138876729
Bug: 142041379
Test: run via gtest with gtest_repeat=10 without failure
Test: run via atest 5x times without failure
Test: observe that isolated applies to both gtest and atest
Change-Id: I757d52dd3233323be9519625868b2fd2aaa41aeb
These tests are flaky, but we're not seeing what the failure strings
are.
Bug: 142041379
Test: force a failure and see the right error message
Change-Id: Icd7777e5c309cac3b98ce65925980965a3cc3753
There are no users; future versions will need to be more generic to
support the libbase style Logger/Aborter options.
Test: build, liblog-unit-tests
Change-Id: Ia4571cd39d3e499f18306920ecbf40ea8878fb81
There are no users of the liblog stderr logger, but 66 users of
android::base::StderrLogger. We'll prefer that format and work to
merge it into liblog.
Test: liblog-unit-tests
Change-Id: Ifad24b27ac0f51379b925f6644caa1f6f3d9ad81
Previously this test would rely on ro.debuggable being true, but there
are now some circumstances where ro.debuggable is true, yet `su` does
not exist. Therefore we only run this test when it is root.
Also simplify some of the test macros.
Bug: 140446213
Test: passes as root, skips as non-root
Change-Id: I0651963d5c7d4f5308989ab6b04aab1042094e5a
liblog has left over code from local_logger that allows for reading
from multiple sources and merging the contents. Since we've already
removed local_logger, this change removes the rest of this code.
Test: liblog-unit-tests
Change-Id: I5685ad6c1e7cbcaa0a660ed10f47714784a40791
Some tests were meant to be run with logd only and were ifdef'ed based
on USING_LOGGER_DEFAULT. Unfortunately a previous change removed the
appropriate #define, so these tests weren't being run at all. They
passed multiple times on CF, so they should still be stable.
Except for one test for __android_log_event_list. We removed that
struct, so this change removes the test as well.
Test: liblog-unit-tests on CF (5 runs)
Change-Id: Ifaf3dbfdc5c714aead3f26c333e9cf19a1ed86c6
This started as a change to use mbrtowc() instead of
utf8_character_length() as mbrtowc() does everything that
utf8_character_length() intends to do, but is a libc function. The
change was further intended to add unit tests to ensure that these
functions operate as intended.
It turns out that utf8_character_length() returned an error for the
utf8 characters that I tested, so this also has the side effect of
allowing valid utf8 characters to be printed in the 'printable' log
format, which was the original intention.
Also, print the binary data as hex instead of octal, since it is a
more suitable choice.
Test: new unit tests, existing unit tests, logcat -v printable
Change-Id: I4cc95aee81519411ef47892ca74eb31117c972d2
socket_local_client() was copied from libcutils, but we only need a
small subset of its functionality. We instead create our own version
with just the needed parts.
Importantly, use CLOEXEC in this new function and other places where
it was missing previously.
Test: logging works, liblog-unit-tests
Change-Id: Ifb929227af67bafa13e391eab92358d9f6fe6450
readv() isn't used by anyone, writev() has one easily replaced user.
uio.h can be left as a private header for windows compatibility with
struct iovec.
Test: build
Change-Id: I33d4c6bdee6fd818271f78ae06abdd2aa09430f2
After a few years of being available, there only ended up being one
user of this, so it is clear that logd's duplicate message mechanism
is the favored solution.
The one user of this rate limiting is questionable as is, since due to
the nature of storaged, the mainloop only runs once per minute by
default as is, so there is essentially nothing to be gained by rate
limiting any further.
Test: build
Change-Id: I0610d11efda1ce8b581b939bad11ff295cb2daa6
Some liblog tests test symbols that aren't otherwise used on the
platform. Statically link the tests such that we can add version
scripts that expose only the symbols used by the platform, and still
allow the tests to test the rest.
Test: build + unit tests
Change-Id: I898280fa52d31a2c7ad4eafdaa85e8b5f2e87971
No users ever signed up to use this, so remove it to ease the
refactoring of liblog/libbase.
Bug: 119867234
Test: liblog unit tests
Change-Id: I37b99644112bae7b4a2e3f4d06749db08de4ea14
Add FALLTHROUGH_INTENDED for clang compiler.
Bug: 112564944
Test: build with global -Wimplicit-fallthrough.
Change-Id: I40f8bbf94e207c9dd90921e9b762ba51abab5777
With replaced AOSP system.img, adb can be root by other test.
The fail is caused by the reason that logdw is still active after
__android_log_close().
This test has a potential bug.
proc/net/unix may contain '\0', then "grep" command will treat this file
as a bianry file.
Using "grep -a" instead of "grep" could be a safer way to get the right
results from bianry file.
bug: 112250722
Test: Build CTS
Test: Pixel 2 XL PPP5.180610.010 passed the following tests
Test: run cts-on-gsi -m CtsLiblogTestCases --skip-preconditions
Change-Id: I9bfca1522e90ebb68e6cecbdb63e3b67248e47c4
Signed-off-by: Xinghua Yang <xinghua.yang@mediatek.com>
On svelte devices, CTS test liblog#android_logger_get_ fails on the
missing kernel buffer because it is not enabled to save space.
Test: gTest liblog_unit_tests
Bug: 109669791
Change-Id: Iaf46fe9713d3462a56885515a67db640544345ab
Add local BM_time_clock_gettime_*, BM_time_clock_getres_* and
BM_time_time benchmarks. Relates to the bionic benchmarks of
the same names, except adds CLOCK_MONOTONIC_RAW. Added here for
developer convenience whenever updates to the liblog or logd
code base need integration testing.
ToDo: add liblog gTests that analyse the benchmark data to confirm
that the specified integrated device has vdso access to all the
pertinent clock sources. Add liblog local benchmarks and tests to
measure the device clock drift of each possible liblog clock
source to help evaluate device configuration.
Test: liblog_benchmarks --benchmark_filter=BM_time*
Bug: 63737556
Bug: 69423514
Change-Id: Ibafe0880d976ef2b3885765f71e0ba6c99d56f2a
Remove our circa 2014 snapshot of the google benchmarking library, and
use the now very stable google-benchmark suite. Some porting effort,
and deal with some benchmarking saddle points that take too long to
sort out. Focus on minimal API changes, _odd_ new behaviors, and style.
Test: liblog_benchmarks, ensure results in about the same range
Bug: 69423514
Change-Id: I2add1df9cb664333bcf983b57121ae151b26935b
Pstore test cases should not belong to CTS.
The test cases should be a part of GTS if really required.
Test: manual
Bug: 66431569
Bug: 63969981
Bug: 63913130
Signed-off-by: Srinavasa Nagaraju <Srinavasa.Nagaraju@sony.com>
Signed-off-by: Yoshitaka Seto <yoshitaka.seto@sony.com>
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Tested-by: Srinavasa Nagaraju <Srinavasa.Nagaraju@sony.com>
Change-Id: Icd326403711ad268ce28a3863045fc9b2f211461
don't abort it after 30s.
Adds a new CTS test to verify the behaviour.
Bug: 64143705
Test: New and existing CTS tests pass. Manual testing with logcat.
(cherry picked from commit 64acdf77d6)
Change-Id: Ic2ec131a3aee293ee865c46e62566ddd82ec2507
liblog concurrent printf tests now check every write succeeds.
logd timeout_negative tests exits as soon as one run succeeds.
Test: CTS tests till pass.
Change-Id: I9a166a0abcb8b9aa5c055c35c5dccf30616a4e24
don't abort it after 30s.
Adds a new CTS test to verify the behaviour.
Bug: 64143705
Test: New and existing CTS tests pass. Manual testing with logcat.
Change-Id: Ia67175701ed8c462083e14e26123ce8ddcb226bc
* Use const reference parameter type to avoid unnecessary copy.
* Use more efficient overloaded string methods.
Bug: 30407689
Bug: 30411878
Test: build with WITH_TIDY=1
Change-Id: Ia5a00581e718d412255d6177e5a7c286cdfbec11
Bug: 36140955
Bug: 35360169
Test: new unit test to ensure that all modules have this field
Change-Id: I352145965e8cd20371ccce3ba2b25f3a166bc3e8
Merged-In: Ifb7a14817265b4624f1dc6414b547c86aafcf4ac
