Init never checked the return values of the calls made during first
stage init (since of course they're not going to fail, right?). But
of course commands can fail and they might not necessarily be obvious
when they do, so let's make it obvious.
Since the kernel log isn't up until later, this creates a list of the
failures that can then be sent to the kernel log once it's ready
(pending of course failures in setting it up...)
Test: boot bullhead, don't see errors
Change-Id: I8c12c61fa12e4368346e8b0e1c0bb0844b5d0377
When adding a new error case for host_init_parser, I didn't handle the
individual line callbacks used for ueventd correctly. This change
fixes that.
Test: bullhead boots without extraneous ueventd warnings
Change-Id: I56cad854b0defd936a7fbcab73fe2f2963c0e2e4
Bug: 36970783
Test: test bullhead successfully at TOT
Test: create errors and check that they're caught
Test: create uid in passwd and check that it's successful
Change-Id: I237fb8df16a294757fe898bdbbd42e850bcb8301
Allow specifying properties on the command line when running host init
verifier. This is needed particularly for importing files that have a
property expansion in their path.
Handle the import statement on host, basing paths off of the out
directory of Android builds.
Bug: 36970783
Test: verify that bullhead imports the correct files and checks them
Change-Id: I4fe263016b3764a372708b559bc0c739b1b7e5e3
Drop all references to keychord_id and id and instead use keycodes_
as the id. The keycodes are a std::vector<int> with an unique
sorted-order emplacement method added in the parser. Solves the
academic issue with duplicate keychords and trigger all services
that match rather than first match only.
Test: init_tests
Bug: 64114943
Change-Id: I5582779d81458fda393004c551c0d3c03d9471e0
Move things around so that keychords.cpp is independent of service
and init and can be individually tested with few dependencies.
Permits also rolling out the keychords as a class in a future commit.
Improve parser checking.
Test: init_tests
Bug: 64114943
Change-Id: I82570bc6269ed478db784ec38a8bc916da2be2be
Currently, permissions for ctl. property apply to each action verb, so
if a domain has permissions for controlling service 'foo', then it can
start, stop, and restart foo.
This change implements finer grainer permissions such that permission
can be given to strictly start a given service, but not stop or
restart it. This new permission scheme is mandatory for the new
control functions, sigstop_on, sigstop_off, interface_start,
interface_stop, interface_restart.
Bug: 78511553
Test: see appropriate successes and failures based on permissions
Merged-In: I6ce915ae39954a67eb6fe1795a93cf715c352ae4
Change-Id: I6ce915ae39954a67eb6fe1795a93cf715c352ae4
(cherry picked from commit 1debdcf1cf)
Currently, permissions for ctl. property apply to each action verb, so
if a domain has permissions for controlling service 'foo', then it can
start, stop, and restart foo.
This change implements finer grainer permissions such that permission
can be given to strictly start a given service, but not stop or
restart it. This new permission scheme is mandatory for the new
control functions, sigstop_on, sigstop_off, interface_start,
interface_stop, interface_restart.
Bug: 78511553
Test: see appropriate successes and failures based on permissions
Change-Id: I6ce915ae39954a67eb6fe1795a93cf715c352ae4
It's currently not clear that the error no indicating the
failure to invoke the library function. This change introduces
logs at the failing of socket connect, that could be clearly
get the true reason.
Test: Set system property with failed, and socket recv errno
log will show
Change-Id: I36bf66988811f953e679d1c5a468de0bf1ab0a05
Signed-off-by: Jinguang Dong <dongjinguang@huawei.com>
Add the ability to enter a network namespace when launching a service.
Typical usage of this would be something similar to the below:
on fs
exec ip netns add namespace_name
service vendor_something /vendor/...
capabilities <lower than root>
user not_root
enter_namespace net /mnt/.../namespace_name
Note changes to the `ip` tool are needed to create the namespace in
the correct directory.
Bug: 73334854
Test: auto team verified
Merged-In: Ifa91c873d36d69db399bb9c04ff2362518a0b07d
Change-Id: Ifa91c873d36d69db399bb9c04ff2362518a0b07d
(cherry picked from commit aead51b418)
During uevent processing, some "by-name" symlinks will be created.
/dev/block/<type>/<device>/by-name/<partition>
<type> can be: platform, pci or vbd.
<device> might be: soc.0/f9824900.sdhci, soc.0/f9824900.sdhci, etc.
<partition> might be: system, vendor, system_a, system_b, etc.
e.g., on a non-A/B device:
/dev/block/platform/soc.0/f9824900.sdhci/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
On a A/B device:
/dev/block/platform/soc/1da4000.ufshc/by-name/system_a
/dev/block/platform/soc/1da4000.ufshc/by-name/system_b
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_a
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_b
However, those symlinks are "device-specific".
This change adds the "generic" symlinks in ueventd, in addition to
the existing symlinks, when the possible "boot devices" are specified
in device tree. e.g.,
&firmware_android {
compatible = "android,firmware";
boot_devices ="soc/1da4000.ufshc,soc.0/f9824900.sdhci";
}
The following symlinks will then be created on the aforementioned non-A/B
and A/B devices, respectively.
/dev/block/by-name/system
/dev/block/by-name/vendor
/dev/block/by-name/system_a
/dev/block/by-name/system_b
/dev/block/by-name/vendor_a
/dev/block/by-name/vendor_b
Note that both <type> and <device> are skipped in the newly create symlinks.
It assumes there is no more than one devices with the same <partition>,
which is the assumption of current first stage mount flow.
Finally, when 'boot_devices' in DT is absent, it fallbacks to extract
'boot_devices' from fstab settings. e.g., using 'soc/1da4000.ufshc',
'soc.0/f9824900.sdhci' for a fstab with the following content:
/dev/block/platform/soc/1da4000.ufshc/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
Bug: 78613232
Test: adb shell ls /dev/block/by-name
Change-Id: Iec920b5a72409b6a2bdbeeb290f0a3acd2046b5d
Merged-In: Iec920b5a72409b6a2bdbeeb290f0a3acd2046b5d
(cherry picked from commit 8eec38f4e4)
The uevent.partition_num easily collides between partitions, for
example:
Both /dev/block/sda3 and /dev/block/sdd3 will generate the same symlink:
/dev/block/platform/soc/1da4000.ufshc/by-num/p3
This change remove those by-num symlinks as there seems no effective
user of it.
Bug: 78613232
Test: m init_tests && \
adb push $OUT/data/nativetest64/init_tests/init_tests /data/. && \
adb shell /data/init_tests
Change-Id: I8dfa8dc1a2f9fc9296aa30f33e905bf158b501de
Merged-In: I8dfa8dc1a2f9fc9296aa30f33e905bf158b501de
(cherry picked from commit 95591bd00e)
Add the ability to enter a network namespace when launching a service.
Typical usage of this would be something similar to the below:
on fs
exec ip netns add namespace_name
service vendor_something /vendor/...
capabilities <lower than root>
user not_root
enter_namespace net /mnt/.../namespace_name
Note changes to the `ip` tool are needed to create the namespace in
the correct directory.
Bug: 73334854
Test: not yet
Change-Id: Ifa91c873d36d69db399bb9c04ff2362518a0b07d
During uevent processing, some "by-name" symlinks will be created.
/dev/block/<type>/<device>/by-name/<partition>
<type> can be: platform, pci or vbd.
<device> might be: soc.0/f9824900.sdhci, soc.0/f9824900.sdhci, etc.
<partition> might be: system, vendor, system_a, system_b, etc.
e.g., on a non-A/B device:
/dev/block/platform/soc.0/f9824900.sdhci/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
On a A/B device:
/dev/block/platform/soc/1da4000.ufshc/by-name/system_a
/dev/block/platform/soc/1da4000.ufshc/by-name/system_b
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_a
/dev/block/platform/soc/1da4000.ufshc/by-name/vendor_b
However, those symlinks are "device-specific".
This change adds the "generic" symlinks in ueventd, in addition to
the existing symlinks, when the possible "boot devices" are specified
in device tree. e.g.,
&firmware_android {
compatible = "android,firmware";
boot_devices ="soc/1da4000.ufshc,soc.0/f9824900.sdhci";
}
The following symlinks will then be created on the aforementioned non-A/B
and A/B devices, respectively.
/dev/block/by-name/system
/dev/block/by-name/vendor
/dev/block/by-name/system_a
/dev/block/by-name/system_b
/dev/block/by-name/vendor_a
/dev/block/by-name/vendor_b
Note that both <type> and <device> are skipped in the newly create symlinks.
It assumes there is no more than one devices with the same <partition>,
which is the assumption of current first stage mount flow.
Finally, when 'boot_devices' in DT is absent, it fallbacks to extract
'boot_devices' from fstab settings. e.g., using 'soc/1da4000.ufshc',
'soc.0/f9824900.sdhci' for a fstab with the following content:
/dev/block/platform/soc/1da4000.ufshc/by-name/system
/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
Bug: 78613232
Test: adb shell ls /dev/block/by-name
Change-Id: Iec920b5a72409b6a2bdbeeb290f0a3acd2046b5d
