ACPR/android_system_core
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_system_core/init/reboot.cpp
Tom Cherry 1ab3dfcab4 Reland^2: "init: run property service in a thread" 
It's been a long standing issue that init cannot respond to property
set messages when it is running a builtin command.  This is
particularly problematic when the commands involve IPC to vold or
other daemons, as it prevents them from being able to set properties.

This change has init run property service in a thread, which
eliminates the above issue.

This change may also serve as a starting block to running property
service in an entirely different process to better isolate init from
handling property requests.

Reland: during reboot, init stops processing property_changed messages
from property service, since it will not act on these anyway.  This
had an unexpected effect of causing future property_set calls to block
indefinitely, since the buffer between init and property_service was
filling up and the send() call from property_service would then
block.  This change has init tell property_service to stop sending it
property_changed messages once reboot begins.

Test: CF boots, walleye boots, properties are set appropriately
Change-Id: I26902708e8be788caa6dbcf4b6d2968d90962785
2019-09-05 14:42:58 -07:00

743 lines
29 KiB
C++
Raw Blame History

/*
* Copyright (C) 2017 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "reboot.h"
#include <dirent.h>
#include <fcntl.h>
#include <linux/fs.h>
#include <linux/loop.h>
#include <mntent.h>
#include <semaphore.h>
#include <sys/cdefs.h>
#include <sys/ioctl.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/swap.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <memory>
#include <set>
#include <thread>
#include <vector>
#include <android-base/chrono_utils.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/macros.h>
#include <android-base/properties.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <bootloader_message/bootloader_message.h>
#include <cutils/android_reboot.h>
#include <fs_mgr.h>
#include <logwrap/logwrap.h>
#include <private/android_filesystem_config.h>
#include <selinux/selinux.h>
#include "action_manager.h"
#include "init.h"
#include "property_service.h"
#include "reboot_utils.h"
#include "service.h"
#include "service_list.h"
#include "sigchld_handler.h"
#define PROC_SYSRQ "/proc/sysrq-trigger"
using android::base::GetBoolProperty;
using android::base::Split;
using android::base::Timer;
using android::base::unique_fd;
using android::base::WriteStringToFile;
namespace android {
namespace init {
// represents umount status during reboot / shutdown.
enum UmountStat {
/* umount succeeded. */
UMOUNT_STAT_SUCCESS = 0,
/* umount was not run. */
UMOUNT_STAT_SKIPPED = 1,
/* umount failed with timeout. */
UMOUNT_STAT_TIMEOUT = 2,
/* could not run due to error */
UMOUNT_STAT_ERROR = 3,
/* not used by init but reserved for other part to use this to represent the
the state where umount status before reboot is not found / available. */
UMOUNT_STAT_NOT_AVAILABLE = 4,
};
// Utility for struct mntent
class MountEntry {
public:
explicit MountEntry(const mntent& entry)
: mnt_fsname_(entry.mnt_fsname),
mnt_dir_(entry.mnt_dir),
mnt_type_(entry.mnt_type),
mnt_opts_(entry.mnt_opts) {}
bool Umount(bool force) {
LOG(INFO) << "Unmounting " << mnt_fsname_ << ":" << mnt_dir_ << " opts " << mnt_opts_;
int r = umount2(mnt_dir_.c_str(), force ? MNT_FORCE : 0);
if (r == 0) {
LOG(INFO) << "Umounted " << mnt_fsname_ << ":" << mnt_dir_ << " opts " << mnt_opts_;
return true;
} else {
PLOG(WARNING) << "Cannot umount " << mnt_fsname_ << ":" << mnt_dir_ << " opts "
<< mnt_opts_;
return false;
}
}
void DoFsck() {
int st;
if (IsF2Fs()) {
const char* f2fs_argv[] = {
"/system/bin/fsck.f2fs",
"-a",
mnt_fsname_.c_str(),
};
android_fork_execvp_ext(arraysize(f2fs_argv), (char**)f2fs_argv, &st, true, LOG_KLOG,
true, nullptr, nullptr, 0);
} else if (IsExt4()) {
const char* ext4_argv[] = {
"/system/bin/e2fsck",
"-y",
mnt_fsname_.c_str(),
};
android_fork_execvp_ext(arraysize(ext4_argv), (char**)ext4_argv, &st, true, LOG_KLOG,
true, nullptr, nullptr, 0);
}
}
static bool IsBlockDevice(const struct mntent& mntent) {
return android::base::StartsWith(mntent.mnt_fsname, "/dev/block");
}
static bool IsEmulatedDevice(const struct mntent& mntent) {
return android::base::StartsWith(mntent.mnt_fsname, "/data/");
}
private:
bool IsF2Fs() const { return mnt_type_ == "f2fs"; }
bool IsExt4() const { return mnt_type_ == "ext4"; }
std::string mnt_fsname_;
std::string mnt_dir_;
std::string mnt_type_;
std::string mnt_opts_;
};
// Turn off backlight while we are performing power down cleanup activities.
static void TurnOffBacklight() {
Service* service = ServiceList::GetInstance().FindService("blank_screen");
if (service == nullptr) {
LOG(WARNING) << "cannot find blank_screen in TurnOffBacklight";
return;
}
if (auto result = service->Start(); !result) {
LOG(WARNING) << "Could not start blank_screen service: " << result.error();
}
}
static void ShutdownVold() {
const char* vdc_argv[] = {"/system/bin/vdc", "volume", "shutdown"};
int status;
android_fork_execvp_ext(arraysize(vdc_argv), (char**)vdc_argv, &status, true, LOG_KLOG, true,
nullptr, nullptr, 0);
}
static void LogShutdownTime(UmountStat stat, Timer* t) {
LOG(WARNING) << "powerctl_shutdown_time_ms:" << std::to_string(t->duration().count()) << ":"
<< stat;
}
/* Find all read+write block devices and emulated devices in /proc/mounts
* and add them to correpsponding list.
*/
static bool FindPartitionsToUmount(std::vector<MountEntry>* blockDevPartitions,
std::vector<MountEntry>* emulatedPartitions, bool dump) {
std::unique_ptr<std::FILE, int (*)(std::FILE*)> fp(setmntent("/proc/mounts", "re"), endmntent);
if (fp == nullptr) {
PLOG(ERROR) << "Failed to open /proc/mounts";
return false;
}
mntent* mentry;
while ((mentry = getmntent(fp.get())) != nullptr) {
if (dump) {
LOG(INFO) << "mount entry " << mentry->mnt_fsname << ":" << mentry->mnt_dir << " opts "
<< mentry->mnt_opts << " type " << mentry->mnt_type;
} else if (MountEntry::IsBlockDevice(*mentry) && hasmntopt(mentry, "rw")) {
std::string mount_dir(mentry->mnt_dir);
// These are R/O partitions changed to R/W after adb remount.
// Do not umount them as shutdown critical services may rely on them.
if (mount_dir != "/" && mount_dir != "/system" && mount_dir != "/vendor" &&
mount_dir != "/oem") {
blockDevPartitions->emplace(blockDevPartitions->begin(), *mentry);
}
} else if (MountEntry::IsEmulatedDevice(*mentry)) {
emulatedPartitions->emplace(emulatedPartitions->begin(), *mentry);
}
}
return true;
}
static void DumpUmountDebuggingInfo() {
int status;
if (!security_getenforce()) {
LOG(INFO) << "Run lsof";
const char* lsof_argv[] = {"/system/bin/lsof"};
android_fork_execvp_ext(arraysize(lsof_argv), (char**)lsof_argv, &status, true, LOG_KLOG,
true, nullptr, nullptr, 0);
}
FindPartitionsToUmount(nullptr, nullptr, true);
// dump current CPU stack traces and uninterruptible tasks
WriteStringToFile("l", PROC_SYSRQ);
WriteStringToFile("w", PROC_SYSRQ);
}
static UmountStat UmountPartitions(std::chrono::milliseconds timeout) {
Timer t;
/* data partition needs all pending writes to be completed and all emulated partitions
* umounted.If the current waiting is not good enough, give
* up and leave it to e2fsck after reboot to fix it.
*/
while (true) {
std::vector<MountEntry> block_devices;
std::vector<MountEntry> emulated_devices;
if (!FindPartitionsToUmount(&block_devices, &emulated_devices, false)) {
return UMOUNT_STAT_ERROR;
}
if (block_devices.size() == 0) {
return UMOUNT_STAT_SUCCESS;
}
bool unmount_done = true;
if (emulated_devices.size() > 0) {
for (auto& entry : emulated_devices) {
if (!entry.Umount(false)) unmount_done = false;
}
if (unmount_done) {
sync();
}
}
for (auto& entry : block_devices) {
if (!entry.Umount(timeout == 0ms)) unmount_done = false;
}
if (unmount_done) {
return UMOUNT_STAT_SUCCESS;
}
if ((timeout < t.duration())) { // try umount at least once
return UMOUNT_STAT_TIMEOUT;
}
std::this_thread::sleep_for(100ms);
}
}
static void KillAllProcesses() {
WriteStringToFile("i", PROC_SYSRQ);
}
// Create reboot/shutdwon monitor thread
void RebootMonitorThread(unsigned int cmd, const std::string& rebootTarget, sem_t* reboot_semaphore,
std::chrono::milliseconds shutdown_timeout, bool* reboot_monitor_run) {
unsigned int remaining_shutdown_time = 0;
// 30 seconds more than the timeout passed to the thread as there is a final Umount pass
// after the timeout is reached.
constexpr unsigned int shutdown_watchdog_timeout_default = 30;
auto shutdown_watchdog_timeout = android::base::GetUintProperty(
"ro.build.shutdown.watchdog.timeout", shutdown_watchdog_timeout_default);
remaining_shutdown_time = shutdown_watchdog_timeout + shutdown_timeout.count() / 1000;
while (*reboot_monitor_run == true) {
if (TEMP_FAILURE_RETRY(sem_wait(reboot_semaphore)) == -1) {
LOG(ERROR) << "sem_wait failed and exit RebootMonitorThread()";
return;
}
timespec shutdown_timeout_timespec;
if (clock_gettime(CLOCK_MONOTONIC, &shutdown_timeout_timespec) == -1) {
LOG(ERROR) << "clock_gettime() fail! exit RebootMonitorThread()";
return;
}
// If there are some remaining shutdown time left from previous round, we use
// remaining time here.
shutdown_timeout_timespec.tv_sec += remaining_shutdown_time;
LOG(INFO) << "shutdown_timeout_timespec.tv_sec: " << shutdown_timeout_timespec.tv_sec;
int sem_return = 0;
while ((sem_return = sem_timedwait_monotonic_np(reboot_semaphore,
&shutdown_timeout_timespec)) == -1 &&
errno == EINTR) {
}
if (sem_return == -1) {
LOG(ERROR) << "Reboot thread timed out";
if (android::base::GetBoolProperty("ro.debuggable", false) == true) {
LOG(INFO) << "Try to dump init process call trace:";
const char* vdc_argv[] = {"/system/bin/debuggerd", "-b", "1"};
int status;
android_fork_execvp_ext(arraysize(vdc_argv), (char**)vdc_argv, &status, true,
LOG_KLOG, true, nullptr, nullptr, 0);
LOG(INFO) << "Show stack for all active CPU:";
WriteStringToFile("l", PROC_SYSRQ);
LOG(INFO) << "Show tasks that are in disk sleep(uninterruptable sleep), which are "
"like "
"blocked in mutex or hardware register access:";
WriteStringToFile("w", PROC_SYSRQ);
}
// In shutdown case,notify kernel to sync and umount fs to read-only before shutdown.
if (cmd == ANDROID_RB_POWEROFF || cmd == ANDROID_RB_THERMOFF) {
WriteStringToFile("s", PROC_SYSRQ);
WriteStringToFile("u", PROC_SYSRQ);
RebootSystem(cmd, rebootTarget);
}
LOG(ERROR) << "Trigger crash at last!";
WriteStringToFile("c", PROC_SYSRQ);
} else {
timespec current_time_timespec;
if (clock_gettime(CLOCK_MONOTONIC, &current_time_timespec) == -1) {
LOG(ERROR) << "clock_gettime() fail! exit RebootMonitorThread()";
return;
}
remaining_shutdown_time =
shutdown_timeout_timespec.tv_sec - current_time_timespec.tv_sec;
LOG(INFO) << "remaining_shutdown_time: " << remaining_shutdown_time;
}
}
}
/* Try umounting all emulated file systems R/W block device cfile systems.
* This will just try umount and give it up if it fails.
* For fs like ext4, this is ok as file system will be marked as unclean shutdown
* and necessary check can be done at the next reboot.
* For safer shutdown, caller needs to make sure that
* all processes / emulated partition for the target fs are all cleaned-up.
*
* return true when umount was successful. false when timed out.
*/
static UmountStat TryUmountAndFsck(unsigned int cmd, const std::string& rebootTarget, bool runFsck,
std::chrono::milliseconds timeout, sem_t* reboot_semaphore) {
Timer t;
std::vector<MountEntry> block_devices;
std::vector<MountEntry> emulated_devices;
if (runFsck && !FindPartitionsToUmount(&block_devices, &emulated_devices, false)) {
return UMOUNT_STAT_ERROR;
}
UmountStat stat = UmountPartitions(timeout - t.duration());
if (stat != UMOUNT_STAT_SUCCESS) {
LOG(INFO) << "umount timeout, last resort, kill all and try";
if (DUMP_ON_UMOUNT_FAILURE) DumpUmountDebuggingInfo();
KillAllProcesses();
// even if it succeeds, still it is timeout and do not run fsck with all processes killed
UmountStat st = UmountPartitions(0ms);
if ((st != UMOUNT_STAT_SUCCESS) && DUMP_ON_UMOUNT_FAILURE) DumpUmountDebuggingInfo();
}
if (stat == UMOUNT_STAT_SUCCESS && runFsck) {
LOG(INFO) << "Pause reboot monitor thread before fsck";
sem_post(reboot_semaphore);
// fsck part is excluded from timeout check. It only runs for user initiated shutdown
// and should not affect reboot time.
for (auto& entry : block_devices) {
entry.DoFsck();
}
LOG(INFO) << "Resume reboot monitor thread after fsck";
sem_post(reboot_semaphore);
}
return stat;
}
// zram is able to use backing device on top of a loopback device.
// In order to unmount /data successfully, we have to kill the loopback device first
#define ZRAM_DEVICE "/dev/block/zram0"
#define ZRAM_RESET "/sys/block/zram0/reset"
#define ZRAM_BACK_DEV "/sys/block/zram0/backing_dev"
static void KillZramBackingDevice() {
std::string backing_dev;
if (!android::base::ReadFileToString(ZRAM_BACK_DEV, &backing_dev)) return;
if (!android::base::StartsWith(backing_dev, "/dev/block/loop")) return;
// cut the last "\n"
backing_dev.erase(backing_dev.length() - 1);
// shutdown zram handle
Timer swap_timer;
LOG(INFO) << "swapoff() start...";
if (swapoff(ZRAM_DEVICE) == -1) {
LOG(ERROR) << "zram_backing_dev: swapoff (" << backing_dev << ")" << " failed";
return;
}
LOG(INFO) << "swapoff() took " << swap_timer;;
if (!WriteStringToFile("1", ZRAM_RESET)) {
LOG(ERROR) << "zram_backing_dev: reset (" << backing_dev << ")" << " failed";
return;
}
// clear loopback device
unique_fd loop(TEMP_FAILURE_RETRY(open(backing_dev.c_str(), O_RDWR | O_CLOEXEC)));
if (loop.get() < 0) {
LOG(ERROR) << "zram_backing_dev: open(" << backing_dev << ")" << " failed";
return;
}
if (ioctl(loop.get(), LOOP_CLR_FD, 0) < 0) {
LOG(ERROR) << "zram_backing_dev: loop_clear (" << backing_dev << ")" << " failed";
return;
}
LOG(INFO) << "zram_backing_dev: `" << backing_dev << "` is cleared successfully.";
}
//* Reboot / shutdown the system.
// cmd ANDROID_RB_* as defined in android_reboot.h
// reason Reason string like "reboot", "shutdown,userrequested"
// rebootTarget Reboot target string like "bootloader". Otherwise, it should be an
// empty string.
// runFsck Whether to run fsck after umount is done.
//
static void DoReboot(unsigned int cmd, const std::string& reason, const std::string& rebootTarget,
bool runFsck) {
Timer t;
LOG(INFO) << "Reboot start, reason: " << reason << ", rebootTarget: " << rebootTarget;
// Ensure last reboot reason is reduced to canonical
// alias reported in bootloader or system boot reason.
size_t skip = 0;
std::vector<std::string> reasons = Split(reason, ",");
if (reasons.size() >= 2 && reasons[0] == "reboot" &&
(reasons[1] == "recovery" || reasons[1] == "bootloader" || reasons[1] == "cold" ||
reasons[1] == "hard" || reasons[1] == "warm")) {
skip = strlen("reboot,");
}
property_set(LAST_REBOOT_REASON_PROPERTY, reason.c_str() + skip);
sync();
bool is_thermal_shutdown = cmd == ANDROID_RB_THERMOFF;
auto shutdown_timeout = 0ms;
if (!SHUTDOWN_ZERO_TIMEOUT) {
constexpr unsigned int shutdown_timeout_default = 6;
constexpr unsigned int max_thermal_shutdown_timeout = 3;
auto shutdown_timeout_final = android::base::GetUintProperty("ro.build.shutdown_timeout",
shutdown_timeout_default);
if (is_thermal_shutdown && shutdown_timeout_final > max_thermal_shutdown_timeout) {
shutdown_timeout_final = max_thermal_shutdown_timeout;
}
shutdown_timeout = std::chrono::seconds(shutdown_timeout_final);
}
LOG(INFO) << "Shutdown timeout: " << shutdown_timeout.count() << " ms";
sem_t reboot_semaphore;
if (sem_init(&reboot_semaphore, false, 0) == -1) {
// These should never fail, but if they do, skip the graceful reboot and reboot immediately.
LOG(ERROR) << "sem_init() fail and RebootSystem() return!";
RebootSystem(cmd, rebootTarget);
}
// Start a thread to monitor init shutdown process
LOG(INFO) << "Create reboot monitor thread.";
bool reboot_monitor_run = true;
std::thread reboot_monitor_thread(&RebootMonitorThread, cmd, rebootTarget, &reboot_semaphore,
shutdown_timeout, &reboot_monitor_run);
reboot_monitor_thread.detach();
// Start reboot monitor thread
sem_post(&reboot_semaphore);
// keep debugging tools until non critical ones are all gone.
const std::set<std::string> kill_after_apps{"tombstoned", "logd", "adbd"};
// watchdogd is a vendor specific component but should be alive to complete shutdown safely.
const std::set<std::string> to_starts{"watchdogd"};
for (const auto& s : ServiceList::GetInstance()) {
if (kill_after_apps.count(s->name())) {
s->SetShutdownCritical();
} else if (to_starts.count(s->name())) {
if (auto result = s->Start(); !result) {
LOG(ERROR) << "Could not start shutdown 'to_start' service '" << s->name()
<< "': " << result.error();
}
s->SetShutdownCritical();
} else if (s->IsShutdownCritical()) {
// Start shutdown critical service if not started.
if (auto result = s->Start(); !result) {
LOG(ERROR) << "Could not start shutdown critical service '" << s->name()
<< "': " << result.error();
}
}
}
// remaining operations (specifically fsck) may take a substantial duration
if (cmd == ANDROID_RB_POWEROFF || is_thermal_shutdown) {
TurnOffBacklight();
}
Service* bootAnim = ServiceList::GetInstance().FindService("bootanim");
Service* surfaceFlinger = ServiceList::GetInstance().FindService("surfaceflinger");
if (bootAnim != nullptr && surfaceFlinger != nullptr && surfaceFlinger->IsRunning()) {
bool do_shutdown_animation = GetBoolProperty("ro.init.shutdown_animation", false);
if (do_shutdown_animation) {
property_set("service.bootanim.exit", "0");
// Could be in the middle of animation. Stop and start so that it can pick
// up the right mode.
bootAnim->Stop();
}
for (const auto& service : ServiceList::GetInstance()) {
if (service->classnames().count("animation") == 0) {
continue;
}
// start all animation classes if stopped.
if (do_shutdown_animation) {
service->Start();
}
service->SetShutdownCritical(); // will not check animation class separately
}
if (do_shutdown_animation) {
bootAnim->Start();
surfaceFlinger->SetShutdownCritical();
bootAnim->SetShutdownCritical();
}
}
// optional shutdown step
// 1. terminate all services except shutdown critical ones. wait for delay to finish
if (shutdown_timeout > 0ms) {
LOG(INFO) << "terminating init services";
// Ask all services to terminate except shutdown critical ones.
for (const auto& s : ServiceList::GetInstance().services_in_shutdown_order()) {
if (!s->IsShutdownCritical()) s->Terminate();
}
int service_count = 0;
// Only wait up to half of timeout here
auto termination_wait_timeout = shutdown_timeout / 2;
while (t.duration() < termination_wait_timeout) {
ReapAnyOutstandingChildren();
service_count = 0;
for (const auto& s : ServiceList::GetInstance()) {
// Count the number of services running except shutdown critical.
// Exclude the console as it will ignore the SIGTERM signal
// and not exit.
// Note: SVC_CONSOLE actually means "requires console" but
// it is only used by the shell.
if (!s->IsShutdownCritical() && s->pid() != 0 && (s->flags() & SVC_CONSOLE) == 0) {
service_count++;
}
}
if (service_count == 0) {
// All terminable services terminated. We can exit early.
break;
}
// Wait a bit before recounting the number or running services.
std::this_thread::sleep_for(50ms);
}
LOG(INFO) << "Terminating running services took " << t
<< " with remaining services:" << service_count;
}
// minimum safety steps before restarting
// 2. kill all services except ones that are necessary for the shutdown sequence.
for (const auto& s : ServiceList::GetInstance().services_in_shutdown_order()) {
if (!s->IsShutdownCritical()) s->Stop();
}
SubcontextTerminate();
ReapAnyOutstandingChildren();
// 3. send volume shutdown to vold
Service* voldService = ServiceList::GetInstance().FindService("vold");
if (voldService != nullptr && voldService->IsRunning()) {
ShutdownVold();
voldService->Stop();
} else {
LOG(INFO) << "vold not running, skipping vold shutdown";
}
// logcat stopped here
for (const auto& s : ServiceList::GetInstance().services_in_shutdown_order()) {
if (kill_after_apps.count(s->name())) s->Stop();
}
// 4. sync, try umount, and optionally run fsck for user shutdown
{
Timer sync_timer;
LOG(INFO) << "sync() before umount...";
sync();
LOG(INFO) << "sync() before umount took" << sync_timer;
}
// 5. drop caches and disable zram backing device, if exist
KillZramBackingDevice();
UmountStat stat = TryUmountAndFsck(cmd, rebootTarget, runFsck, shutdown_timeout - t.duration(),
&reboot_semaphore);
// Follow what linux shutdown is doing: one more sync with little bit delay
{
Timer sync_timer;
LOG(INFO) << "sync() after umount...";
sync();
LOG(INFO) << "sync() after umount took" << sync_timer;
}
if (!is_thermal_shutdown) std::this_thread::sleep_for(100ms);
LogShutdownTime(stat, &t);
// Send signal to terminate reboot monitor thread.
reboot_monitor_run = false;
sem_post(&reboot_semaphore);
// Reboot regardless of umount status. If umount fails, fsck after reboot will fix it.
RebootSystem(cmd, rebootTarget);
abort();
}
bool HandlePowerctlMessage(const std::string& command) {
unsigned int cmd = 0;
std::vector<std::string> cmd_params = Split(command, ",");
std::string reboot_target = "";
bool run_fsck = false;
bool command_invalid = false;
if (cmd_params[0] == "shutdown") {
cmd = ANDROID_RB_POWEROFF;
if (cmd_params.size() >= 2) {
if (cmd_params[1] == "userrequested") {
// The shutdown reason is PowerManager.SHUTDOWN_USER_REQUESTED.
// Run fsck once the file system is remounted in read-only mode.
run_fsck = true;
} else if (cmd_params[1] == "thermal") {
// Turn off sources of heat immediately.
TurnOffBacklight();
// run_fsck is false to avoid delay
cmd = ANDROID_RB_THERMOFF;
}
}
} else if (cmd_params[0] == "reboot") {
cmd = ANDROID_RB_RESTART2;
if (cmd_params.size() >= 2) {
reboot_target = cmd_params[1];
// adb reboot fastboot should boot into bootloader for devices not
// supporting logical partitions.
if (reboot_target == "fastboot" &&
!android::base::GetBoolProperty("ro.boot.dynamic_partitions", false)) {
reboot_target = "bootloader";
}
// When rebooting to the bootloader notify the bootloader writing
// also the BCB.
if (reboot_target == "bootloader") {
std::string err;
if (!write_reboot_bootloader(&err)) {
LOG(ERROR) << "reboot-bootloader: Error writing "
"bootloader_message: "
<< err;
}
} else if (reboot_target == "recovery") {
bootloader_message boot = {};
if (std::string err; !read_bootloader_message(&boot, &err)) {
LOG(ERROR) << "Failed to read bootloader message: " << err;
}
// Update the boot command field if it's empty, and preserve
// the other arguments in the bootloader message.
if (boot.command[0] == '\0') {
strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
if (std::string err; !write_bootloader_message(boot, &err)) {
LOG(ERROR) << "Failed to set bootloader message: " << err;
return false;
}
}
} else if (reboot_target == "sideload" || reboot_target == "sideload-auto-reboot" ||
reboot_target == "fastboot") {
std::string arg = reboot_target == "sideload-auto-reboot" ? "sideload_auto_reboot"
: reboot_target;
const std::vector<std::string> options = {
"--" + arg,
};
std::string err;
if (!write_bootloader_message(options, &err)) {
LOG(ERROR) << "Failed to set bootloader message: " << err;
return false;
}
reboot_target = "recovery";
}
// If there are additional parameter, pass them along
for (size_t i = 2; (cmd_params.size() > i) && cmd_params[i].size(); ++i) {
reboot_target += "," + cmd_params[i];
}
}
} else {
command_invalid = true;
}
if (command_invalid) {
LOG(ERROR) << "powerctl: unrecognized command '" << command << "'";
return false;
}
LOG(INFO) << "Clear action queue and start shutdown trigger";
ActionManager::GetInstance().ClearQueue();
// Queue shutdown trigger first
ActionManager::GetInstance().QueueEventTrigger("shutdown");
// Queue built-in shutdown_done
auto shutdown_handler = [cmd, command, reboot_target, run_fsck](const BuiltinArguments&) {
DoReboot(cmd, command, reboot_target, run_fsck);
return Result<void>{};
};
ActionManager::GetInstance().QueueBuiltinAction(shutdown_handler, "shutdown_done");
// Skip wait for prop if it is in progress
ResetWaitForProp();
// Clear EXEC flag if there is one pending
for (const auto& s : ServiceList::GetInstance()) {
s->UnSetExec();
}
// We no longer process messages about properties changing coming from property service, so we
// need to tell property service to stop sending us these messages, otherwise it'll fill the
// buffers and block indefinitely, causing future property sets, including those that init makes
// during shutdown in Service::NotifyStateChange() to also block indefinitely.
SendStopSendingMessagesMessage();
return true;
}
} // namespace init
} // namespace android
Reference in a new issue View git blame Copy permalink