drm/bridge: adv7511_audio: Update Audio InfoFrame properly
[ Upstream commit 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 ]
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
parent
6ffd9a346f
commit
53425075fb
1 changed files with 12 additions and 2 deletions
|
|
@ -147,7 +147,16 @@ int adv7511_hdmi_hw_params(struct device *dev, void *data,
|
|||
ADV7511_AUDIO_CFG3_LEN_MASK, len);
|
||||
regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
|
||||
ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
|
||||
regmap_write(adv7511->regmap, 0x73, 0x1);
|
||||
|
||||
/* send current Audio infoframe values while updating */
|
||||
regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
|
||||
BIT(5), BIT(5));
|
||||
|
||||
regmap_write(adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(0), 0x1);
|
||||
|
||||
/* use Audio infoframe updated info */
|
||||
regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
|
||||
BIT(5), 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -178,8 +187,9 @@ static int audio_startup(struct device *dev, void *data)
|
|||
regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0),
|
||||
BIT(7) | BIT(6), BIT(7));
|
||||
/* use Audio infoframe updated info */
|
||||
regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1),
|
||||
regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
|
||||
BIT(5), 0);
|
||||
|
||||
/* enable SPDIF receiver */
|
||||
if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF)
|
||||
regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue